Epoxy floor coatings can be slippery when wet, but they can be modified with slip-resistant additives to create a safer surface. This is especially important in commercial kitchens, garages and industrial environments.

Yes, epoxy can be applied over most existing floors, provided the substrate is properly prepared. This includes cleaning, repairing any damage and ensuring the floor is completely flat.

The curing time of an epoxy floor can vary, but generally it takes about 24 to 72 hours before it can be walked on. For complete curing and maximum load, approximately 7 days should be allowed.

Epoxy floors are durable and long-lasting, meaning they don't need to be replaced as often as other floor coverings. Some epoxy formulations contain lower levels of volatile organic compounds (VOCs), which contributes to better air quality.

The lifespan of an epoxy floor coating can vary depending on several factors, such as floor traffic, quality of materials and quality of installation. Our coating lasts (if properly applied and maintained) 10 years in commercial or industrial environments, and often much longer in a home.

Epoxy floor coatings are generally not suitable for outdoor use because they can discolour and break down under the influence of UV radiation and extreme weather conditions. However, there are special types of coatings available that are designed to better withstand outdoor conditions.

Although epoxy floor coatings offer many advantages, there are also some disadvantages. Epoxy can be slippery when wet, although this can be remedied with non-slip additives. It can also be prone to scratches and may discolor or yellow after prolonged exposure to sunlight.

Yes, damage to epoxy floor coatings can usually be repaired. Small scratches or cracks can be filled with an epoxy repair compound. For more extensive damage, it may be necessary to sand and recoat the damaged area of ​​the floor. It is important to note that the color of the new coating may not exactly match the older, existing coating.

To best apply epoxy to your floor, follow these steps:

1. Preparation : Make sure the floor is clean, dry and free of dust, grease or oil. Repair any cracks.
2. Applying primer : Apply an epoxy primer for better adhesion.
3. Mixing : Mix the epoxy resin and hardener according to the instructions.
4. Application : Apply the epoxy evenly with a roller. Work in small sections.

View our full manual here.

This depends on the number of layers. On average, our coating costs approximately €9 per m2 (based on 2 layers).

Yes, epoxy can certainly be applied to a concrete floor. In fact, concrete is one of the most suitable surfaces for epoxy coatings due to its strength and flatness. Before applying the epoxy, it is important to ensure that the concrete floor is clean, dry and free of cracks, oil or dust. Preparing the floor, such as sanding or applying a primer, may also be necessary to ensure good adhesion.

The difference is in the thickness and method of application: epoxy floor coating is a thinner layer that is rolled or painted, while an epoxy cast floor is thicker and is poured and spread for a seamless finish.

That's certainly possible! We have the ability to mix any color for you. Contact us for the possibilities.

You can usually apply the next layer after 24 hours.

The difference between PU (polyurethane) and epoxy coatings lies mainly in their physical properties and applications:

1. Flexibility : PU is more flexible than epoxy. This makes PU more resistant to scratches and impacts, while epoxy is harder and more wear-resistant.
2. UV resistance : PU coatings are generally UV stable and do not discolour quickly in the sun, while epoxy can yellow when exposed to UV radiation.
3. Chemical Resistance : Epoxy generally has better resistance to chemicals than PU, which is why it is often used in industrial environments.

To determine which coating is suitable for your type of floor, there are a number of factors to consider:

1. Floor Type : Different floors such as concrete, wood, or tiles require specific coatings. For concrete, epoxy and polyurethane are popular choices.
2. Use of the Space : In industrial or commercial spaces where heavy loads occur, a strong and durable coating such as epoxy is ideal. For living spaces, polyurethane may be a better choice because of its flexibility and comfort.
3. Exposure to Chemicals : If your floor is exposed to chemicals, oil or acids, a chemically resistant coating such as epoxy is recommended.
4. UV Exposure : If the floor is exposed to a lot of sunlight, a UV-resistant coating such as polyurethane is better to prevent discoloration.
5. Aesthetic Preferences : For a glossy, seamless finish, a cast floor such as epoxy or PU may be suitable, while for a more natural look other options may be better.
6. Budget and Maintenance : Also consider your budget and how much maintenance you are willing to do. Some coatings may be more expensive to purchase, but require less maintenance.

It is always good to seek advice. Please contact us if you have any questions about what suits you best.

Floor coatings can be applied to various types of floors, including:

1. Concrete floors : One of the most common types for applying coatings such as epoxy or polyurethane, due to their durability and ability to protect concrete from wear, chemicals, and moisture.
2. Wooden Floors : Special coatings are available for wood to protect them against wear, water and UV radiation.
3. Garage floors : Often concrete, these floors benefit from epoxy coatings that can withstand oil stains, tire tracks and heavy loads.
4. Industrial Floors : In factories or warehouses, strong coatings such as epoxy are often used for their resistance to heavy machinery and chemical spills.
5. Commercial Floors : Coatings are used in shops, offices, and public spaces for aesthetics and durability, often with slip-resistant properties.
6. Kitchens and Bathrooms : In these areas, coatings that are waterproof and easy to clean are essential.
7. Sports floors : Specific coatings are used to provide cushioning and grip in gyms and sports facilities.

Every floor and environment has specific requirements, so it is important to choose the right coating that suits the use and properties of the floor.

Our coatings can withstand a certain amount of heat (such as a cup of hot tea or a pan of boiling water), but can discolour, soften or damage at extremely high temperatures. However, they are suitable for normal domestic or commercial use where direct exposure to very high temperatures is unlikely.

Yes, epoxy floor coating can discolour in certain circumstances. The main factors that can lead to discoloration are:

1. UV Exposure : Prolonged exposure to sunlight can cause epoxy coatings to turn yellow or discolor. This is one of the most common causes of epoxy discoloration.
2. Chemicals : Some chemicals can react with epoxy and cause discoloration.
3. Age : Over time, epoxy can naturally discolor, especially if exposed to the above factors.

To minimize discoloration, you can choose a UV-resistant top coat or a specially formulated epoxy that is more resistant to UV light and chemicals. Regular maintenance and avoiding direct, prolonged exposure to sunlight can also help maintain the coating's original color.

Before you apply epoxy coating, your floor must meet a number of conditions to ensure that the coating adheres well and lasts a long time:

1. Clean : The floor must be free of dirt, dust, grease, oil, or other contaminants. A thorough cleaning is essential.
2. Dry : The floor must be completely dry. Any moisture can affect the adhesion of the epoxy and lead to problems such as blistering or peeling.
3. Flat and Repaired : Any cracks, holes or irregularities in the floor must be repaired and leveled. A flat surface ensures even application of the coating.
4. Roughened : Especially with smooth concrete floors, it is often necessary to roughen the surface (for example by sanding or blasting). This ensures better adhesion of the epoxy.
5. Moisture content : Check the moisture content of the floor. Too high a moisture content can cause problems. The acceptable humidity level may vary depending on the epoxy product.
6. No Old Coatings or Seals : If there are old layers of paint, seals or other coatings on the floor, these may need to be removed before applying the epoxy.
7. Temperature and Humidity : Ensure that the conditions in the room are suitable. The ideal temperature and humidity for applying epoxy varies by product, so check the specifications.

It is important to follow the epoxy coating manufacturer's instructions carefully and seek professional advice for specific situations if necessary.

When applying epoxy floor coatings, it is important to take various safety aspects into account. First of all, ensure a well-ventilated room by opening windows and doors and using fans if necessary. This helps remove fumes and odors. Personal protection is crucial; wear nitrile gloves, safety glasses and protective clothing such as long sleeves and long trousers. Be careful with the epoxy resin and hardener as these are chemicals that can cause irritation. Keep the area free of open flames and do not smoke while working to avoid fire hazards. Keep all materials safe and out of the reach of children and pets. Follow the manufacturer's instructions carefully, both for mixing and applying the coating. Also make sure you know what to do in case of contact with the skin or eyes, or in case of inhalation of vapors. Finally, use the right tools and make sure they are in good condition to avoid accidents. By following these safety measures, you can work safely with epoxy floor coatings.